A flattering cropped jacket
I made this style in three fabrics for Vogue:
A textured purple wool with silk-screened grosgrain zipper trim
and purple double knit sleeves.
A soft kiwi wool coating with checkered zipper trim
and deep grey rib knit sleeves.
A medium weight red wool coating with a jacquard zipper trim
and black double knit sleeves.
Choosing the perfect ribbon is as much fun
as choosing the knit for the sleeve.
Keep your eye out
for thrift shop sweaters in the right color or contrast
to use for the sleeves.
Gotta love that up-cycling.
Some great possibilities for the jacket body from
Marcy's fabulous Website include:
available in Kiwi, Crimson or Pewter.
For the sleeves some options are:
gives you a choice of which side to use.
or black or black on black stripe.
So many wonderful possibilities.
For the zipper, remember you can always start with
a longer separating zipper than you need and cut it down.
Make sure the zipper pull is at the bottom of the zipper.
Mark the top of the zipper where you want it to end.
Cut the zipper 1/2" above that mark and trim off the unneeded teeth.
Stitch off the top of the new zipper to form a 'stop'.
Finish the 'stop' and cut edges with Fray Check.
Press the extra zipper tape to the back.
Fuse your chosen ribbon to both sides of the zipper
and press ends to the back.
Then stitch ribbon to zipper close to the teeth.
I silk-screened grosgrain for this zipper trim.
Fuse zipper to front of jacket to hold for stitching.
Fusible tape shown here on the back.
I mark the placement on wool fabric
with a wax 'chalker' line that will press out.
Stitch it in place on the left side of the jacket.
Apply trimmed zipper to the right side front
after the jacket front is finished.
I want to make this pattern in a denim type fabric
with a wild print lining
for an upscale jean jacket.